Stone Floor Cleaning & Sealing in Pueblo, CO – Natural Beauty Restored

Why Pueblo chooses All Floors Pueblo

• Stone-safe process: pH-appropriate cleaners and pads; no harsh acids on sensitive stones.

• Grout attention: Brush agitation and hot water recovery to lift embedded soils in grout lines.

• Finish options: Natural-look penetrating sealers; sheen-enhancing finishes for the right surfaces.

• Spot fixes: Light etch and scratch improvement guidance; referral for honed/polished restoration if needed.

• Honest recommendations: We’ll tell you when cleaning + sealing is enough—and when full honing/polishing makes sense.

Stones and areas we service

• Marble, Travertine, Limestone, Slate, Granite, Flagstone

• Kitchens, entries, hallways, baths, showers, laundry/mud rooms, and commercial lobbies

Our 5-Step Stone Cleaning & Sealing Process

1. Inspection & protection – identify stone type, finish, coatings/waxes, and problem spots; protect adjacent surfaces.

2. Stone-safe cleaning – pH-appropriate pre-spray; dwell; detail agitation on tile faces and deep grout brushing.

3. Rinse & recovery – controlled hot-water rinse and vacuum recovery to remove soils and residues.

4. Dry & prep for sealer – forced airflow; verify dryness and pore readiness.

5. Sealing – apply penetrating sealer (natural look) or appropriate finish; test-bead and wipe to an even result.

For etched/polished marble needing a sheen reset, we’ll outline a honing/polishing path or connect you with our specialty partner.

Add-ons (popular)

• Grout recolor/seal for uniform appearance on dingy grout

• Anti-slip treatment (select surfaces) in wet-prone areas

• Shower stone care: soap-film removal and reseal

• Counter/vanity sealing (granite/quartzite) add-on during the same visit

When you may need restoration (not just cleaning)

• Obvious etch rings from acids (lemon, wine, cleaners)

• High-traffic scratch patterns and dull “walk paths” on marble/travertine

• Old topical coatings that yellow or peel
  If we spot these, we’ll explain honing/polishing or coating removal options and provide an estimate or referral.

Pricing guidance (typical ranges)

• Standard stone floor cleaning (up to ~150 sq ft): $199–$299

• Add deep grout focus / heavy soil: +$0.35–$0.65/ft²

• Penetrating sealer (natural look): $0.60–$1.25/ft²

• Enhanced finish/semi-sheen (eligible stones): $0.90–$1.75/ft²

• Showers (per enclosure): $149–$299 (soil/soap film dependent)

Final price depends on stone type, soil level, square footage, and sealer selection. You’ll get a clear written quote first.

Care & maintenance tips

• Use pH-neutral stone cleaner; avoid vinegar/acidic products

• Mop with microfiber; change water frequently

• Blot spills quickly—especially acidic liquids (wine, citrus)

• Place walk-off mats at entries; use felt pads on furniture

• Reseal periodically (we’ll recommend a cycle based on your stone and traffic)

FAQs

Will sealing change the color or add shine?
Penetrating sealers are typically natural-look (no sheen). If you want a light sheen, ask about eligible finishes for your stone.

Can you remove etch marks on marble?
Cleaning won’t remove etches; honing/polishing is required. We’ll assess and provide options.

How long before we can walk on it?
Light traffic after cleaning/sealing is often allowed the same day; full cure for sealers varies by product (we’ll advise).

Do you clean grout too?
Yes—deep grout agitation and rinse recovery are part of the service. Recolor/seal is available for stained grout.

Serving Pueblo & Southern Colorado

We provide Floor Cleaning across:

• Pueblo – Everyday homes cared for with precision

• Pueblo West – Fast-drying cleaning for busy households

• Cañon City – Trusted by historic homeowners

• Colorado Springs – Expanding cleaning services backed by certification

Call (719) 247-3739 for your free estimate.

Customer Reviews

See what our satisfied clients say about our cleaning services.

Ready To Give Your Floors A Second Glow?

Book your professional stone floor cleaning and sealing today